Pinewood Derby Purchase Timer Page

Complete Package:
    $349 (plus shipping)    Includes-
*   Completely assembled and tested system (tower, interface box, microcontroller chip and all cables).
*   Grand Prix Tracker Software includes free updates(download on this site)
*   Custom sized Tower (height & width) using 2, 3 or 4   tracks.
*   Note: additional cable length can be ordered.
- Standard length - computer must be 10' from the
finish line.
- Optional additional length - computer must be 35' from the finish line

You Build Package:
    $75 (plus shipping)      Includes-
*   Grand Prix Tracker Software includes free updates (download on this site)
*   Schematics (on this site).
*   Complete Parts List (on this site). You purchase the parts(the itemized parts cost can vary depending upon if you substitute materials, parts, components and already have wire, solder and use different hardware techniques for the tower).
*   Programmed Microcontroller Chip
(tested and mailed to you).
*   Assembly Aid Instructions (on this site).

This product can be purchased in two ways:

SUBMIT YOUR ORDER EARLY!

(Track Not Included)

Complete Package: $349 (plus shipping)
Includes-

Completely assembled and tested system (tower, interface box, gate switch, microcontroller chip and all cables).
Grand Prix Tracker Software includes Free Updates (download on this page)
Custom built Tower to fit your Tracks specs (2, 3 or 4 lanes - submitted by you on the submit form).
Note: Additional cable length can be ordered.

                Standard length - (computer must be within 10' from the finish line).
                Optional additional length - (computer must be within 35' from the finish line).

You Build Package:     $75 (plus shipping)
     Includes-

Grand Prix Tracker Software includes Free Updates (download on this page)
Schematics (links to documentation).
Complete Parts List (links to documentation). You purchase the parts (the itemized parts cost can vary depending upon if you substitute materials, parts, components and already have wire, solder and use different hardware techniques for the tower).
Programmed Microcontroller Chip with Firmware loaded (tested and mailed to you).
Project Assembly Instructions (links to documentation).

Please Order the Product and Download the Software using a Desktop or Laptop computer at:
GrandPrixTracker.com/purchase.html

system hardware not required to sample using tutorial mode

"Prices exclude shipping and handling"

Download >>>

here Free

<<< Download
here Free

(software version 19.04.06)

{The purchased Password enables the micro-controller functions}

NOTE:
After placing your order an Information & Track Specification form should be presented automatically. If this Submit form was NOT displayed after your PayPal order or you need to enter this information at a later time then clicking the link below will redisplay this form. I cannot start your build until I receive this form.

Please understand that some simple drilling could be required on your part (2 tower bracket holes, sensor holes and gate switch).

Website and contents created by: Michael A. Hornback - Logo and Banners created by: Mindezigns

After verification of payment, an email will be sent to you within 24 hours with a Password that will allow the 'Grand Prix Tracker' program to run with no limitations. The Purchased product will be mailed to you USPS.

NOTE: Tracks wider than 16" will be charged an additional material, shipping and handling fee